Shanghai SEME Co.,LTD. product list http://yuqilinhou.ietrade.com.cn/ Tue, 17 Jun 2008 20:58:43 +0800 FeedCreator 1.7.2 http://yuqilinhou.ietrade.com.cn/product_view/3133/Nonpressure-gasoline-welding-and-cutting-machine.html   I. Low cost: Gasoline is an economic fuel, after validating, 3 L gasoline ‘s (about 12 RMB) workload is equal to 1 bottle of acetylene (about 80RMB). It can saving energy more than 80%. And it can save energy more than 50% to compare with dimethylmethane, LPG and Shope gas. II. Easy operation: There are no power, no pressure in gasoline tank and without boring set-up service before using. The torch structure is reasonable. It predigests the site clear work after using. III. Safe and reliable: There is all with liquid from the gasoline tank to the cutting tip, and liquid is not backfire, so the machine has no phenomena of backfire. The gasoline tank is filled with high technology flameproof material that was recommended by the Ministry of public security and Ministry of labor. The gasoline will burn slowly even directly ignite to gasoline in the tank, no exquisite burning and blast. (If the oil tank equipped this kind of flameproof material, you can weld to it even with oil.) In addition, when the cutting torch is working, even the oil tube is cut off immediately,the cutting torch will work for several minute till the gasoline used up. There is no risk of splash. It is the advance than other gasoline torch. IV. Good cutting quality: There are no undercut, burning sink in upside; and there are no nodulation, hung bits in downside. The cutting surface is clear without acierate and cirrhosis. It can reduce material wasting and processing difficulty hugely.   V. Adaptability extensively: It can be used not only for cutting, welding and heating all thickness of carbon steel, but also for heat melt and flame processing of golden and silver headgear, glass, quartz, electric products, dimension stone. It can be used in metallurgy, shipbuilding, boiler, automobile, machine work, chemical plant, architecture, and farm machinery and repairing. The market mechanism is very amplitude. There are handgrip type, semi automatic, duplicating and bake torch model for cutting and heating. The Max. cutting thichness is 300mm, the welding torch can weld 1-5mm steel sheet, it can also be used for silver soldering, braze, lead welding and non-ferrous metal welding. VI. Fast working: The flame temperature of gasoline cutting torch is 3000-3300?. The warm-up time for cutting is short. Cutting speed is fast. After practice, the cutting speed can reach 500mm/min when cutting 20mm steel sheet under 20?. The gasoline bake torch has driving firepower, it can save time 30-50% to compare with acetylene when heating workpieces that can save more than 90% energy. VII. convenient transportation: The gasoline welding & cutting machine is makeup by blast proof gasoline tank, oil-resistant rubber hose and welding and cutting torch, the total weight is only 6 kg. So it is very convenient for conveyance and taking. At the same time, gasoline can be purchased everywhere easily. VIII. Green environmental protection: Along with the extensive use of this product, people can save plenty of electrical power and mineral resources, reduce pollution from acetylene. And there is no resid and black smoke, no harm to the circumstance. It is contribution in the contemporary era to gain in the future. Tue, 17 Jun 2008 12:58:42 +0800 http://yuqilinhou.ietrade.com.cn/product_view/3134/vacuum-kiln.html 1.Good Drying: a.No crook,No deform b.No Mildew c.No Crack( The thinckness <1000 mm) d.No face harden e.70%-80% of bending materials (percentage of moisture <20%)are flattened and straightened when drying. 2.Good drying Quickness ( for whatever material of wood ,The period is not exceed 100 hours) 3.Lower expense:for whatever material of wood ,The expensive is not exceed RMB60/m3. 4.Not need steam boiler,pipe,civil engineering etc. 5.Not need consumption material as salver,spacing timber etc. 6.so quick to fix and test equipment:on same day to fix and test and use. 7.Flexibility:Could move it by real requirement 8.Adaptability:Suit to Veneer drying (rapidness, non-warp, non-vesiculate) 9.Floor place: maximum <50 m2 10.Dependable performance,Easy to learn ,understand and operate. 11.Environmental protection and energy-saving:can use wood scrap ,coal,kerosene,Natural gas,electric as fuel. 12.Good design ,Distinctive appearance 13.Kiln color is fresh ,beautiful and humanization 14.Material: Accord to Europe market and safety standard. 15.American?NASH_ELMO?Vacuum pump?Germany?WILO?Circulation pump?American?LIGNOMAT?Measurement System for water? 16.Stainess steel structure,Aluminum alloy thermofor: Be good for avoid to rust kiln,postpone using life.     Tue, 17 Jun 2008 12:58:42 +0800 http://yuqilinhou.ietrade.com.cn/product_view/3135/Digital-generator.html Model SEME1000Ti Type AVR with Brush Single phase Rated Frequency(Hz) 50/60 Rated Voltage(V) 230  120/240 Rated Output(KVA) 0.9 Max AC Output(KVA) 1.05 DC Output 12V-8.3A Type Single-cylinder,4-stroke,Air-cooled OHV, Fuel  Gasoline Displacement(ml) 53.2 Fuel Consumption(g/kwh) 480 Ignition System (TCL)Non-contact Transistorized Magneto Starting System Recoil and hand-operated Fuel Tank Capacity(L) 2.8 Noise Level(dBA@m) 54-59 Dry Weight(kg) 14.5(45) Gross Weight(kg) 16 Packing Dimension(mm) 515x270x430 Volume(set) (20'container) 475   Tue, 17 Jun 2008 12:58:42 +0800 http://yuqilinhou.ietrade.com.cn/product_view/3136/Diesel-generator.html we provide the diesel generator from 0.8kw to 3000kw.If you are interesting in our company,please contact with us,we would be provide good service and supprt to you. Tue, 17 Jun 2008 12:58:42 +0800 http://yuqilinhou.ietrade.com.cn/product_view/3137/Biogas-generator.html we provide the BIOGAS generator from 0.6kw to 1000kw.If you are interesting in our company,please contact with us,we would be provide good service and supprt to you. Tue, 17 Jun 2008 12:58:42 +0800 http://yuqilinhou.ietrade.com.cn/product_view/3138/LPG-generator.html we provide the LPG generator from 0.8kw to 5kw.If you are interesting in our company,please contact with us,we would be provide good service and supprt to you. Tue, 17 Jun 2008 12:58:42 +0800 http://yuqilinhou.ietrade.com.cn/product_view/3139/NG-generator.html we provide the NG generator from 0.8kw to 2000kw.If you are interesting in our company,please contact with us,we would be provide good service and supprt to you. Tue, 17 Jun 2008 12:58:42 +0800 http://yuqilinhou.ietrade.com.cn/product_view/3140/Hydro-power.html We provide the Hydro power generator from 200kw to 20000kw .If you are interesting in our company,you need more information,please contact with us,I will send the catalog to you Tue, 17 Jun 2008 12:58:42 +0800 http://yuqilinhou.ietrade.com.cn/product_view/3141/Steam-turbine.html We provide the steam turbine generator from 150kw to 50000kw .If you are interesting in our company,you need more information,please contact with us,I will send the catalog to you Tue, 17 Jun 2008 12:58:42 +0800 http://yuqilinhou.ietrade.com.cn/product_view/3142/Wind-power.html We provide the Wind power generator from 0.3kw to 300kw and 780kw,1500kw .If you are interesting in our company,you need more information,please contact with us,I will send the catalog to you Tue, 17 Jun 2008 12:58:42 +0800